- Saffire mixcontrol monitoring pc output full#
- Saffire mixcontrol monitoring pc output pro#
- Saffire mixcontrol monitoring pc output zip#
- Saffire mixcontrol monitoring pc output download#
If i pan all the way to the right in Logic, no signal gets through. No matter what i seem to try, no matter how i change the settings in mix control the panning always stays pretty centered. It all seems to be determined by Mix Control. Now, I am able to record in Logic currently, however, i have ZERO control over panning or how much signal is getting through.
Saffire mixcontrol monitoring pc output pro#
In Logic channels 9 and 10 are armed, input and record enabled(those are the channels for SPIDF on the Saffire pro 40) In Mix Control channel inputs 9 and 10 are set to SPIDF 1.1 and 1.2 respectively If anyone has experience with this set up, i would greatly appreciate some pointers! Using the analog ins is very straight forward, but using SPIDF in has not so far. This is my first time using any outboard gear thats not just directly plugged into one of the main first 8 inputs, and its been trickier than i expected. I am able to monitor my kemper profiles and hear myself playing just fine via my monitor outs from the Saffire to my speakers, however, my issues start when trying to get the signal routed into Logic X via Focusrites Mix Control software. I am using a Focusrite Saffire Pro 40 firewire interface, into a mid 2011 imac running High Sierra, via SPIDF cable ins and outs. Ok, so i have looked across multiple threads here and i havent found the answer for the issues im having. Be sure to unzip the files before attempting to load them.Hi everyone! Brand new Kemper user here, so please, bear with me if i sound like an idiot. These can be loaded to your Pro40 by accessing MixControl > File > Load.
Saffire mixcontrol monitoring pc output zip#
zip files contain the Pro40 MixControl setups from Setup 1 and Setup 2.
Saffire mixcontrol monitoring pc output download#
zip files linked below available for download - these. Your interface would need to be set to sync over ADAT. Note the unit needs to be set to internal sync for this setup. This would be connected to the input of your other interface. To use this setup, you would need 1 optical cable - connected to the optical output of the Standalone unit. The screenshot below details a simpler setup of a Saffire Pro 40 for A/D Conversion (8 Analog Inputs > ADAT Output), Setup 2. These would be connected to the optical output and optical input of your other interface respectively. To use this setup, you would need 2 optical cables - one connected to the optical input of the Standalone unit and one connected to the optical output of the Standalone unit. The screenshot below details a setup of a Saffire Pro 40 for A/D Conversion (8 Analog Inputs > ADAT Output) and D/A Conversion (ADAT Input to 8 Line Outputs), Setup 1. You can now turn off and disconnect the device and then turn it on without the Firewire or USB cable connected to enter Standalone Mode. Then click File > Save To Hardware to save these settings in the device's memory.
Saffire mixcontrol monitoring pc output full#
On interfaces where the Monitor Knob is a digital encoder (Pro 40, LS56) shift clicking the Monitor Enable buttons gray will disengage those Line Outputs from the Monitor Knob, sending full Line Level Signal regardless of the Monitor Knob setting.Īfter setting up your Routing make sure to check that you are using the intended Sample Rate of your Session and appropriate Sync Source! Note: On interfaces where the Monitor Knob is an analog pot rather than a digital encoder you will need to make sure the Monitor Knob is turned up all the way for a full Line Level Signal. Here is an example of Pro 40 D/A Standalone Mode Routing:įor D/A make sure you Shift+Click the Monitor Enable Buttons so that your Line Outputs will send a full Line Level Signal. To set up D/A Conversion for Standalone Mode you will use the Routing Section of Saffire or Scarlett MixControl to route individual channels to the Analog Outputs of the device.
Here is an example of Pro 40 A/D Standalone Mode Routing: To set up any A/D Conversion for Standalone Mode you will be using the Routing Section of Saffire or Scarlett MixControl to route the channels to the ADAT Outputs (or your choice.) In the case of units with ADAT or SPDIF Inputs you can use these to return individual channels or a Mix of Channels to this interface for further D/A conversion for uses such as Monitoring or additional outputs to a Mixer. Direct Monitoring) or to send either two channels or a Mix of channels over a SPDIF Output (if the interface has SPDIF):
The following units do not have ADAT Outputs, but can be set up to send their Analog Inputs to the their Analog Outputs (i.e. The following units can be setup to send their Analog Inputs over their ADAT Outputs: This enables the user to set these units up to work as an ADAT connected unit, similar to one of our Octopre MkIIs or any other ADAT connected set of Mic Pres. Our higher I/O-capacity interfaces come with an added feature called Standalone Mode. Applies to: Scarlett (6i6, 18i8, 18i20), Saffire (Pro 14, Pro 24, Pro 24 DSP, Pro 40, Liquid Saffire 56)
0 kommentar(er)
